1PC 28x47x12 mm Steering Head Bearing 284712 Tapered Roller Motorcycle Bearings for Column

BearingsWhat Is Motorcycle Steering-Head BearingsIf we want to steer straight and narrow our Steering Bearings must be in good condition.Most newer bikes use tapered roller bearings. Roller bearings use caged rollers in place of ball bearings. When they are fitted to the triple tree, Tapered Roller Bearings normally use a tight fit on the lower bearing and a loose fit on the top bearing.TECHNICAL SPECSType: Taper Roller Bearing Steering bearings for motorcycleLubrication: Need GreaseDimensions: 28 x 47 x 12 mmID (inner diameter)/Bore: 28 mmOD (outer diameter): 47 mmWidth/Height/thickness: 12 mmQuantity: 1 PieceWhen do I need to change bearingsWear comes from one of three things.1. Good honest usage.2. Long hours of riding in the bed of a truck or trailer.3. Abuse and lack of maintenance.I've seen worn steering bearings that tended to keep the steering in one place. You could turn the handlebars to the right or left OK, but with the handlebars straight forward there is a definite "Groove" that the steering sort of "Falls" into. I've seen this on high mileage street bikes with roller bearings. I've also seen it on dirt bikes with ball bearings which have spent many hours riding in the back of pickup trucks.To get rid of this the bearing must be replaced.If rust or dirt has gotten into the bearings they should be replaced. Sometimes you can clean the rust or dirt out,regrease the bearing and everything will work OK. You will have to decide on a case by case basis. If possible, it is best to replace the bearings.1. Why do the bearings I received have shaking?The clearance of the bearing is related to the play.The default is the standard C0 clearance, which is usually 3-18um.The corresponding principle is shown in the figure below.If you don't need to shake, please choose C2 small clearanc

• Bearings