Head Mounted RTD Temperature Transmitter for Pharma, Agro Chemical, Industrial Process, Reactors | Thermocouple Transmitter | Model: ABB TTH200

The ABB TTH 200 Head Mount Temperature Transmitter with the 4 to 20 mA output and HART communications protocol has global approvals for explosion protection up to Zone 0. Safety-relevant applications up to SIL 3(redundant) are supported in accordance with 61508 Digital transmitters are communication-ready devices with microprocessor-controlled electronics. They conform to the requirements of IP rating IP 20 and are suited for integration into DIN A and DIN B sensor heads In the HART transmitter, an FSK signal is superimposed on the 4 to 20 mA output signal in accordance with the HART standard to facilitate bidirectional communication. The transmitters can be configured, polled, and tested using a DTM, an EDD or using the Field Information Manager (FIM). Handheld terminals can also be used for communication purposes. As an option, the transmitter can be fitted with a type AS LCD display. The LCD display is used exclusively for visualizing current process values. The electrical connection between the LCD display and transmitter is provided by a 6-pin flat ribbon cable with a plug connector. The LCD display can only be operated when connected to transmitters that have an LCD display interface. Features Of TTH 200 Head Mounted Temperature Transmitter :HART Compatibility ATEX, IECEx, Zone 0 Compliance The TTH200 meets all requirements for the CE mark in accordance with IEC 61326 (2006)Conforms with IEC 61508 as regards use in safety-related applications, up to and including SIL 2.

• ABB Head Mount Temperature Transmitter Features: Input circuit and communication: Universal sensor input for resistance thermometers (RTD) and thermocouples; Communication via a 4 to 20 mA signal and the HART protocol | Device versioning in accordance with NE 53; Continuous monitoring of supply voltage; Wire break/corrosion monitoring in accordance with NE 89
• Ambient temperature: Standard: −40°C to 85°C (−40°F to 185°F) | Electrical isolation : 3.5 kV DC (approx. 2.5 kV AC), 60 s, input to output | MTBF time: 190 years at 40 °C (104 °F) mean ambient temperature | Input filter: 50 / 60 Hz | Warm-up time: 5 minutes | Rise time t90: 400 to 1000 ms | Measured value update: 10/s, independent of sensor type and sensor circuit
• Storage temperature : −50°C to 85°C (−58°F to 185°F) | Max. permissible humidity in accordance with IEC 60068-2-30: 100 % relative air humidity| Switch-on delay : < 10 s (Ia ≤ 3.6 mA during switch-on cycle) | Output filter: Digital filter 1st order: 0 to 100s | Electrical connection: Terminals with captive stainless steel screws, including soldering tags; Lines up to a maximum of 1.5 mm2 (AWG 16); Connection for handheld terminal
• Climate class in accordance with DIN EN 60654-1: Cx −40 to 85 °C (−40 to 185 °F at 5 to 95 % relative air humidity | Shock resistance in accordance with IEC 68-2-27): gn = 30, during operation and transport | IP rating : Power supply circuit: IP 20; Measurement current circuit: IP 00 or IP-rating of installation housing
• Supply Scope: 1 unit of ABB-TTH200 and Instruction Manual | Applications: Pharma, Agro-Chemical, Dairy, Pharmaceutical Equipment Manufacturers, industrial processes, reactor, furnace